Boveda - Standard Stacked Cedar Holder for Humidors - Holds 2 Packs

Single Boveda Standard Stacked Side by Side Holder for Humidors - Holds 2 Packs

The Standard Stacked Boveda Holder is designed for Humidors to keep your packs side by side and allow your humidor to look neat and tidy, This holder is made out of cedar wood which is ideal to reduce the natural absorption of humidity.

Specifications:

Includes: 1 x Standard Holder and 1 x Mounting Kit (No Boveda packs are provided with this holder.)

Dimensions: 5.5" x 4" x 1"

Some preparation is required before mounting your new holder, here's a step by step guide.

1) Prepping the humidor surface:

• Use a dry cloth to wipe down the underside of the humidor lid.
• Choose either the enclosed metal or magnetic sheet to affix to the humidor, then peel off the paper backing to expose the adhesive. (If you're using the enclosed hook and loop kit, affix the soft-sided strips to the humidor.)
• With the sticky side up, apply the sheet to the humidor. Apply simultaneous pressure for 60 seconds to the sheet and the reverse side of the lid. (If you hear any cracking, back off on the pressure.)

2) Prepping the cigar holder:

• You do not need to season the Cedar Boveda Holder before using it.
• Wipe down the holder with a dry cloth.
• Place the holder on a hard surface.
• Peel off the paper backing on the remaining sheet.
• Place the sticky side on the back of the holder and apply soft pressure for 60 seconds. (Using too much pressure may result in cracking.)

3) Settling time:

• Allow the adhesive to set for 24 hours.
• After 24 hours, slip a Boveda Size 60 into each side of the holder.
• Attach the back of the holder inside your humidor's lid.

Boveda doesn't require any activation, maintenance, mess-making, or worry.

To learn more about how Boveda maintains constant humidity for the ideal tobacco and cigars, as well as for many other uses, click here and scroll to the bottom of the page.